Dear operator：
In order to avoid harm to you due to accidental factors during the operation of the laser cutting machine, Shandong Rayther Laser Intelligent Technology Co., Ltd. following informs you, please learn and master the following safety common sense one by one and strictly implement them in your work..
1. The laser cutting machine should be operated by a special person. When multiple people operate, a main operator must be designated
2.During the processing of the machine, the operator is not allowed to leave the machine tool. It is necessary to ensure that there is an operator who can monitor the running status of the machine tool at any time. Once an abnormal situation occurs, please stop the machine urgently, and the production can only continue after the problem is eliminated. During the cutting process, if there is any abnormality, stop the cutting immediately, stop the operation of the equipment, and then check the problem.
3. During the maintenance process of the machine tool, the power supply must be kept in a power-off state and supervised by a special person to prevent accidental switch-on. When the cutting machine is powered on or the equipment is running, it is strictly forbidden for any part of the body to enter the machine tool.
4. The operator should not look directly at the laser flame during cutting, but should wear laser protective glasses to prevent burning eyes. Non-machine operators are not allowed to enter the cutting processing area.
5. When loading and unloading sheets, appropriate spreaders and tools should be used to ensure the safety of personnel and equipment. The cleanliness and flatness of the processed sheet must be guaranteed, and the operator should refuse to process the sheet with serious corrosion and poor flatness.
6. Disassembly and assembly of the nozzle, replacement of the ceramic ring, adjustment of the coaxiality of the dimmer and the application of transparent glue must be done by one person, and the shutter must be closed first.
7. The waste cart at the bottom of the machine is not allowed to throw flammable items, and at the same time prepare safe fire-fighting and fire-fighting equipment, such as fire extinguishers.
8. Leave safe passages on both sides of the machine tool, and set up safety signs, such as prohibiting outsiders from entering, prohibiting use during operation, and paying attention to protecting eyes and body.
9. Do not touch any switches with wet hands to avoid electric shock. There are lightning signs on the protective cover of the servo motor position of the machine tool, the junction box behind the column, the transformer cabinet of the machine tool, and the door of the electrical cabinet, indicating that there are high-voltage electrical appliances or electrical components in these parts. When the operator approaches these parts or opens the maintenance Extra care should be taken to avoid electric shock. Do not open the electrical cabinet door easily, and do not change the set machine parameters, etc. If it must be changed, it should be operated by a professional who has been trained and approved by the manufacturer, and the parameters before the change should be recorded for recovery. Do not touch the numerical control device, servo device, transformer, fan and other charged components in the electrical cabinet when the power is on. [Warning]: After power off, stop for a period of time (more than 15 minutes) before touching the terminals. Because there is high voltage between the power line terminals for a period of time after the power is cut off. To avoid electric shock, please do not touch it immediately.
10. Operators must undergo special training, and only when their skills reach a certain level can they be allowed to work on the job.