Dear operator:
In order to avoid harm to you due to accidental factors during the operation of the laser engraving machine, Shandong Rayther Intelligent Technology Co.,Ltd. inform as follows:
1. Before you enter the operation site, you have received safety education from the project department and Shandong Raize Intelligent Technology Co., Ltd. The company's equipment operation training, master the safety operation regulations of this type of work, understand the requirements of on-site civilized operation, and be proficient in operating laser equipment, You can work on the job only after you can use the safety protection equipment and facilities correctly.
2. When entering the operation site, you must wear personal labor protection equipment that meets the regulations.
3. Without permission during the operation, it is strictly forbidden to engage in non-standard work, work after drinking, bare feet, slippers, high Heels and short-sleeved tops or shorts enter the operation site. During the operation, it is strictly forbidden to play and listen to music. Do not do anything that has nothing to do with work the behavior of.
4. You are strictly prohibited from throwing objects at the location of the laser equipment during operation, and you are not allowed to be on the edge of danger without safety protection. Rest or dock on the full protective railing.
5. Before you operate, you should ensure that the operating environment of the equipment is above zero degrees Celsius and less dusty.
6. Before you operate, you should carefully check whether the power supply of the equipment is normal, and keep the equipment for 5-10 minutes after starting up No-load operation, stop after the operation, and then proceed to the next step.
7. Before you operate, you should carefully check whether there are other foreign objects around the laser equipment that have blocked or may block the laser equipment operation.
8. Before you operate, you should carefully check whether there is any irrelevant total reflection or diffuse reflection in the laser equipment body, in case the laser is directly reflected on the human body or flammable objects.
9. You have already understood the operating specifications of laser equipment, and the startup process and shutdown process must strictly abide by the usage specifications.
10. During your operation, avoid looking directly at the laser with your eyes. Use lasers in controllable areas and add warning signs. Do not use without permission, only professionally trained personnel are allowed to operate.
11. The operator should stick to his post and pay attention to the operation of the equipment at any time. If a failure occurs, he should immediately press the emergency stop switch and wait for Restart the machine after troubleshooting.
12. During the working process of the machine, someone must be on duty to prevent abnormalities or fires; within 5 meters near the equipment It is strictly forbidden to place flammable and explosive items, and drive away irrelevant personnel.
13. If the machine malfunctions or a fire occurs, please cut off the power immediately; when a fire occurs, only carbon dioxide can be used to extinguish the fire Extinguish fire with extinguisher or powder.
14. When the laser equipment is in operation, it needs to be inspected, debugged, or personnel and the mechanical part of the laser equipment need to be directly or indirectly When contacting, the power of the whole machine must be turned off, and the equipment inspection can only be carried out after confirmation by more than 2 people.
15. In case of sudden power failure, the main power switch should be turned off in time.
16.Before shutting down, the system should return to the main operation menu, and each control switch should be reset. Power off the system first, then Turn off the main power. Check whether each control handle is in the closed position, turn off the air source and water source, and leave after confirming that it is correct.
17.The equipment should be ready for maintenance before maintenance, clean up the site, cut off power and water, and hang maintenance warning signs.
18.In addition to ensuring the safety of yourself and others during operation, you should also ensure the safe operation of the operating equipment used, Verify that the surrounding environment of the operation site is not damaged by your operation behavior.
