In recent years, metal laser cutting machines have become more and more popular in the machinery industry, but the purchase cost of a laser cutting machine is not low. How can we avoid the decline in the cutting capacity of the cutting machine in daily production? Today Rayther Laser will give you a brief analysis of the reasons.
1. Analysis of the reasons for the decline in the cutting capacity of the metal laser cutting machine:
After the fiber metal laser cutting machine is used for a long time, the laser power will attenuate and decrease, which will directly affect the cutting performance.
The laser cutting speed is directly related to the power of the laser, the higher the power, the higher the cutting speed. The focus position affects the cutting progress, and the diameter of the focus spot should be as small as possible to produce a narrow kerf. If cutting performance decreases, adjust the focus position. The distance between the workpiece and the nozzle also affects the cutting effect. If the distance is too far, energy will be wasted. If the distance is too close, it will affect the dispersion of splashed cutting products. In addition, improper operation, long-term load production, long-term lack of maintenance, etc. will lead to a decline in the performance of the fiber laser cutting machine equipment, and the cutting effect will be greatly reduced.
2. Analysis of preventive measures that cause the cutting capacity of metal laser cutting machines to decline:
Follow general cutting machine safety operating procedures. Strictly follow the laser start-up procedure to start the laser, adjust the light, and test the machine. The fiber metal laser cutting machine should be operated by a special person, and it should be trained by professionals: the operator must be trained, familiar with the cutting software, equipment structure, performance, and master the relevant knowledge of the operating system. It is very important to execute the sequence of switching on and off correctly, to be familiar with each switch panel button, to operate the fiber laser cutting machine correctly, and so on.
When the equipment is in operation, the operator is not allowed to leave the post without authorization or entrust someone to take care of it. If it is really necessary to leave, the operator should stop or cut off the power switch. When any abnormality is found during the processing, it should be shut down immediately, and the fault should be eliminated in time or reported to the supervisor.
Pay attention to the maintenance of the fiber metal laser cutting machine. The fiber metal laser cutting machine has been processed for a long time, and many parts will be worn out, which will obviously affect the performance of the processing equipment, so maintenance is very important. For wearing parts, they should be replaced frequently; optical components should be wiped clean after use to maintain cleanliness; bearings should be oiled regularly to maintain driving flexibility and processing accuracy.
The application of metal laser cutting machine is very extensive, including many industries. Used in sheet metal processing, chassis cabinets, lighting, machining and hardware industries. If you need metal laser cutting and laser welding equipment, remember to find us.