Weekly maintenance and maintenance of cutting machine

1. Clean the machine comprehensively every week, clean the horizontal and vertical guide rails, drive gear racks, and add lubricating oil.
2. Check whether the horizontal and vertical rail cleaners are working normally, and replace them in time if they are not normal.
3. Check whether all torches are loose, clean up the garbage at the ignition gun port, and keep the ignition normal.
4. If there is an automatic height adjustment device, check whether it is sensitive and whether the probe needs to be replaced.
5. Check whether the plasma cutting nozzle and electrode are damaged, and whether the cutting nozzle and electrode need to be replaced.