Preparation work before cutting machine

1. The performance of the equipment must be carefully checked before use to ensure the integrity of each component.
2. The power switch, the tightness of the saw blade, the saw blade guard or the safety baffle shall be inspected in detail. The operating table must be stable, and there should be sufficient lighting brightness for night work.
3. Before using, turn on the main switch first, and turn it around for a few times without load, and then allow it to start after confirming that it is safe and correct.
4. Before operation, you must check whether the power supply is consistent with the conventional rated 220VA voltage on the electric tool, so as not to connect to the 380VA power supply by mistake.