
To ensure the safe and efficient operation of the fiber laser welding machine, please strictly follow the instructions below. Proper handling minimizes risks to both personnel and equipment.
1. Read the Manual & Follow Operating Procedures
Before use, carefully read the instruction manual and operate the machine strictly in accordance with the specified procedures. Only trained personnel should handle the equipment to prevent accidents.
2. Pre-Operation Inspection
Before starting, check all components of the welding machine to ensure they are functioning correctly.
After operation, inspect the machine and work area for potential hazards to maintain a safe environment.
3. Prevent Fires from Laser Exposure
The high-power laser beam can ignite flammable materials upon direct or reflected exposure.
The laser system contains high-voltage components (thousands to tens of thousands of volts), posing an electric shock risk.
Safety measures:
Only authorized and trained personnel may operate the machine.
The optical path must be fully enclosed in metal to prevent accidental exposure.
The welding workstation should have protective shielding to block radiation.
4. Protect Your Eyes from Laser Damage
The high-density laser beam can cause permanent eye damage.
Always wear laser safety goggles during operation to shield your eyes from harmful radiation.
5. Avoid Skin Burns from Laser Exposure
Direct laser contact can burn the skin, while prolonged exposure to scattered reflections may lead to skin aging, inflammation, or even cancer.
Wear protective work clothes to minimize exposure to diffuse reflections.
6. Maintain Cooling Water Quality
The laser's performance depends on clean circulating water. Dirty water reduces laser output efficiency.
Replace cooling water based on usage time, water quality, and environmental conditions (summer replacements should be more frequent than in winter).
7. Grounding & Laser Beam Safety
The machine's housing must be properly grounded to prevent electrical hazards.
Never look directly at the laser beam or allow body parts (e.g., hands) to come into contact with it.
8. Keep the Machine & Environment Clean
Regularly clean the work area and machine components.
Frequently inspect the laser rod and optical parts for contamination or damage.
9. Maintenance & Emergency Procedures
Before maintenance, disconnect power and discharge capacitors to avoid electric shock.
If any abnormalities occur during operation, immediately:
- Press the <Emergency Stop> button
- Cut off power using the air switch
- Investigate the issue before resuming work.
For any questions regarding fiber laser welding machines, please contact us rayther@raytherlasercutter.com for professional support.
--Allen Wang








